CONTROL FEATURES
• Programmable Key Pad Controls
• LCD Display Screen (providing function control viewing)
• Variable Turntable Speed 0-15 RPM
• Variable Film Carriage Speed Up/Down Control
• Separate Top/Bottom Wrap Selectors 1-9
• Separate Film Height Selector 1-9"
• Flush Mounted Control Panel (built into tower)
• Cycle Counter
• Manual Carriage Raise/Lower Control
• Turntable Jog with Auto Home Alignment
• Large Emergency push button power On / Off Switch with indicator light
• Start Cycle Push Button
• Standard Wrap Up/Down Program
• 12 Volt DC Control System (for operator safety)
• All circuits protected by fuses (easy access)
• 20 amp Power Board Circuits to carry a 10 amp load
TECHNICAL INFORMATION
• All switches, relays, and SCR controls etc. are available
locally throughout North America
• Power requirements 115 VAC @ 15Amps, 60Hz
• Complete manual with electrical schematic provided
with machine
TURNTABLE DRIVE
• Positive home alignment and counter
• 0 -15 RPM turntable speed
• 1/2 HP SCR variable speed drive
• Adjustable electronic DC soft start / stop
STRUCTURAL FEATURES
• Heavy Duty 3/8" turntable plate
Fork Lift portable from rear
• Formed steel tower
5/16" thick base plate
Three 3/8" thick support rings
CARRIAGE LIFT
• UltraWear slide supports
• Heavy duty ANSI #50 chain carriage lift
• 1/2 HP DC SCR variable speed drive
• Carriage chain fully guarded
FILM DELIVERY
• Fox "DYNAMIC" non pre-stretch delivery system, constant film tensioning through the entire roll diameter
Capable of 100% plus stretch
• Uses hand or machine film (Maximum 10” OD roll)
• Triple beam auto height eye capable of recognizing
all colors including black
FOX C1 OPTIONS:
• Loading Ramp
Extended Heavy Duty Ramp for powered hand truck
Base and Height extension (1ft increments)
• Rigid base frame construction
• 56” Diameter steel turntable plate
• 32 table support wheels requires no lubrication to
the face or under the table (250lbs dynamic each wheel)
• Heavy duty #50 chain and sprocket drive system
• 3” from floor to top of turntable
• Suggested Maximum Load Size: 52”L x 52”W (74” Diagonal) x 90” High
• Weight Capacity: 5000 lbs.
3 Powder Coat Finish
