|
|
|
  
Fox C1 Plus Low Profile Pallet Wrapper |
|
|
Fox C1 Semi-Automatic Pallet Wrapper
The Fox C1 Plus Semi Automatic Pallet Wrapper is a full-featured machine for medium pallet wrapping requirements. Features include, variable Film Carriage & Turntable speed controls, wrap selectors, PLC controls with a LCD screen displaying variable functions, a Photo-eye for load detection and heavy-duty construction. This model also comes equipped with the Fox 20 inch pre-stretch film delivery system, providing superior stretch film yields. The Fox C1 Plus pallet wrapper comes with all the favourite operating features, durability and performance featured in higher end semi-automatic pallet wrappers. This combination thus presents one of the most cost effective pallet wrapper with pre stretch capability. The C1 Plus Low Profile pallet wrapper also comes backed by Fox 3 year warranty.
CONTROL FEATURES
- PC board with e-prom memory
- Large Emergency push button power On / Off Switch with indicator light
- Start Cycle push button
- Standard wrap up / down program
- Separate top and bottom wrap selectors (1-6)
- Film height adjustment photo eye
- Variable turntable rotation speed control (0-15 RPM)
- Variable speed carriage up / down control
- Manual Carriage raise and lower push buttons
- Turntable jog control with auto alignment feature
- 24 Volt control systems (for operator safety)
- All circuits protected by fuses (easy access)
- 1/2 HP motor and DC controllers with soft start/stop
- Detailed electric schematic
- Programmable Key Pad Controls
- LCD Display Screen (providing function control viewing)
- Cycle Counter
- Large Emergency push button power On / Off Switch with indicator light
- Start Cycle push button
- Standard wrap up / down program
- Separate top and bottom wrap selectors (1-9)
- Separate Film Height Selector 1-9"
- Film height adjustment photo eye
- Variable turntable rotation speed control (0-15 RPM)
- Variable speed carriage up / down control
- Manual Carriage raise and lower push buttons
- Turntable jog control with auto alignment feature
- 12 Volt DC control systems (for operator safety)
- All circuits protected by fuses (easy access)
- 20 amp Power Board Circuits to carry a 10 amp load
TECHNICAL INFORMATION
- All switches, relays, SCR controls are available locally throughout North America
- Power Requirements: 115 VAC @ 15 Amps, 60 Hz
- Complete manual with electrical schematic provided with machine
FILM DELIVERY
- FOX "Linear" 20 inch powered pre-stretch film delivery system
- Easy thread film carriage
- No hinges, latches or idler rollers to wear and cause inconsistent film stretching
- Electronic film force control on film carriage
- Adjustable mechanical force to load
- Sensor switch film feed speed control
- 1/2 HP DC SCR variable speed film drive
- Pre-stretch 50-300% upon request (200% standard settings)
- Triple beam auto height eye capable of recognizing all colors of film including black
CARRIAGE LIFT
- UHMW Slide guide
- Heavy duty ANSI #50 Chain Carriage Lift
- 1/2 HP DC SCR variable speed drive
- Carriage chain fully guarded
TURNTABLE DRIVE
- Positive home alignment and counter
- 0 -15 RPM turntable speed
- 1/2 HP SCR variable speed drive
- Adjustable electronic soft start / stop
STRUCTURAL FEATURES
- Heavy Duty 3/8" turntable plate
- Fork Lift portable from rear
- Formed steel tower
- 5/16" thick base plate
- Three 3/8" thick support rings
TURNTABLE / BASE FRAME / LOAD CAPACITY
- Rigid base frame construction
- 56in Diameter steel turntable plate
- 32 table support wheels requires no lubrication to the face or under the table (250 lbs Dynamic each wheel)
- Heavy duty #50 chain and sprocket drive system
- 3 in from floor to top of turntable
- Suggested Maximum Load Size: 52" x 52" (74" Diagonal ) x 90" High
- Weight Capacity: 5000 lbs.
- Powder Coat Finish
Video Demonstration
|
|
|
