Fox C4 High Profile Semi-Automatic Pallet Wrapper

CONTROL FEATURES

• Programmable Key Pad Controls
• Flush mounted control panel built into tower
• LCD display screen providing detailed function control viewing
• PLC with back lit LCD screen and E-prom memory
• Large Emergency push button power On / Off switch with indicator light
• Start Cycle push button
• Standard wrap up / down program
• Separate top and bottom wrap selectors (1-9)
• Separate film height over load selector (1-9)
• Variable turntable rotation speed control (0-15 RPM)
• Variable speed carriage up / down control
• Reinforce wrap function (2 wraps)
• Cycle counter (keeps track of each load wrapped)
• Manual Carriage raise and lower push buttons
• Turntable jog control with auto home alignment feature
• 12 Volt control systems (for operator safety)
• 20 Amp Power Boards Circuit to carry a 10 Amp load
• Circuit breakers on the panel face for main power and DC drive boards

• Heavy Duty 3/8" Turntable Plate
• Fork lift portable front or rear
• Large formed steel tower
• Base plate 5/16in. thick steel
• Rigid unibody base frame construction

• All switches, relays, SCR controls are available locally throughout North America
• Power Requirements: 115 VAC @ 15 Amps, 60 Hz
• Complete manual with electrical schematic provided with machine

• FOX Linear 20 inch powered pre-stretch film delivery system
• Easy thread film carriage
• No hinges, latches or idler rollers to wear and cause inconsistent film stretching
• Electronic film force control on panel
• Adjustable mechanical force to load
• Linear analog proximity sensor film feed speed control
• 1/2 HP DC SCR variable speed film drive
• Pre-stretch 50-300% upon request (200% standard settings)
• Triple beam auto height eye capable of recognizing all colors including black

• V Groove wheels support providing effortless movement (Qty: 4)
• Heavy duty ANSI #50 chain carriage lift
• 1/2 HP DC SCR variable speed drive
• Carriage chain fully guarded

• Positive home alignment
• 0 -15 RPM turntable speed
• 1/2 HP SCR variable speed drive
• Adjustable electronic soft start / stop
• Rigid base frame construction
• 48 Octagon steel turntable plate
• No Face Lubrication Required
• Lubrication Points on caster roller bearing and swivel
• 4 Heavy Duty Support Swivel Casters (2000 lbs each)
• Heavy duty #50 chain and sprocket drive system
• 10 7/8" from floor to top of turntable
• Suggested Maximum Load Size: 55L x 55 W (78 Diagonal) x 82 High
• Weight Capacity: 5000 lbs.