|
|
|
  
Fox C3/3 Dual Turntable Low Profile Pallet Wrapper |
|
|
Fox C3/3 Dual Turntable Deluxe Low Profile Semi-Automatic Pallet Wrapper
The Fox C3/3 Dual has the same specifications of the Fox C3 but has an extra turntable for added productivity.
CONTROL FEATURES
- Programmable Key Pad Controls
- Flush mounted control panel built into tower
- LCD display screen providing detailed function control viewing
- PLC with back lit LCD screen and E-prom memory
- Large Emergency push button power On / Off switch with indicator light
- Start Cycle push button
- Standard wrap up / down program
- Separate top and bottom wrap selectors (1-9)
- Separate film height over load selector (1-9)
- Variable turntable rotation speed control (0-15 RPM)
- Variable speed carriage up / down control
- Reinforce wrap function (2 wraps)
- Cycle counter (keeps track of each load wrapped)
- Manual Carriage raise and lower push buttons
- Turntable jog control with auto home alignment feature
- 12 Volt control systems (for operator safety)
- 20 Amp Power Boards Circuit to carry a 10 Amp load
- Circuit breakers on the panel face for main power and DC drive boards
STRUCTURAL
- Heavy Duty 3/8" Turntable Plate
- Fork lift portable front or rear
- Large formed steel tower
- Base plate 5/16in. thick steel
- Rigid unibody base frame construction
TECHNICAL INFORMATION
- All switches, relays, SCR controls are available locally throughout North America
- Power Requirements: 115 VAC @ 15 Amps, 60 Hz
- Complete manual with electrical schematic provided with machine
FILM DELIVERY
- FOX Linear 20 inch powered pre-stretch film delivery system
- Easy thread film carriage
- No hinges, latches or idler rollers to wear and cause inconsistent film stretching
- Electronic film force control on panel
- Adjustable mechanical force to load
- Linear analog proximity sensor film feed speed control
- 1/2 HP DC SCR variable speed film drive
- Pre-stretch 50-300% upon request (200% standard settings)
- Triple beam auto height eye capable of recognizing all colors including black
CARRIAGE LIFT
- V Groove wheels support providing effortless movement (Qty: 4)
- Heavy duty ANSI #50 chain carriage lift
- 1/2 HP DC SCR variable speed drive
- Carriage chain fully guarded
TURNTABLE DRIVE
- Positive home alignment
- 0 -15 RPM turntable speed
- 1/2 HP SCR variable speed drive
- Adjustable electronic soft start / stop
- Rigid base frame construction
- 56 Diameter steel turntable plate
- 32 table support wheels requires no lubrication to the face or under the table (250 lbs Dynamic each wheel)
- Heavy duty #50 chain and sprocket drive system
- 3" from floor to top of turntable
- Suggested Maximum Load Size: 55L x 55 W (78 Diagonal) x 90 High
- Weight Capacity: 5000 lbs.
|
|
|
